Thermal conductive oil electric heater (commonly known as oil heater, oil heater, working different also known as temperature moulding machine) energy-saving, environmental protection, safe and stable temperature control equipment, but before the use of temperature control equipment to carry out the necessary corresponding processing preparations, in order to ensure that the first use of heating equipment can work normally. The manufacturer of air duct heating pipe will explain the preparation work before operation for you.

1. Before using heat conducting oil heater (oil thermostat), it is necessary to clear the accumulated water of heating equipment and pipeline. The pipeline accumulated water which is difficult to clean can be blown by air gun, and conditionally blown by hot air. It is difficult to clean up and debug the water thoroughly, and there will be certain danger.

2. After the confession equipment is drained clean, inject heat conducting oil. When injecting heat conducting oil, we should pay attention to not filling up the expanding tank at one time. After injecting the oil level into a certain liquid level, turn over to install a circulating oil pump. This way, following the injection of heat conducting oil and the discharge of air, we should continue to inject heat conducting oil. When the circulating oil pump works, we should pay attention to investigating the pressure gauge and the flashover of the pressure gauge. The pressure is stable and the pressure is in the allowable plan. It is stated that the air in the equipment pipeline has been completely cleared now.

3. In the case of stable system pressure, the heat conducting oil heater can initiate heating. During the heating process, attention should be paid to not heating too fast. It is necessary to investigate whether the pressure of pressure gauge is stable or not. When the pressure is unstable, it should not continue to rise. When the temperature rises to the highest set value of the equipment, the pressure is stable, and the debugging of the oil temperature machine is successful.

In conclusion, we must be careful when using oil heater, careful process, safer heating, especially when water vapor evaporation is found when heating above 100 C, pay special attention to safety.